Applicators for industrial use

Characteristics

For in-factory manufacturing and other area that require a painting process, our applicators can be used to easily paint a designated area by filling pen-shaped containers with fluid. This allows for painting to be done more efficiently.

Kuretake manufactures writing instruments with a variety of shapes.

We meet a wide range of needs with our unique broad tips, fine tips, brush tips and other types of tips, as well as different variations of containers.

These instruments can of course also be used for application work outside of the factory.

We can also design and develop pens or pen parts to match the shapes you need. Feel free to inquire with us.

Case studies

  • Although adhesive was previously applied using brushes in this factory, they switched to pen-shaped containers, improving work efficiency.

  • By using a pen-type container for marking using a special liquid, we were able to reduce inconsistencies during application, as well as cut down the number of defective products and inspection criteria.

Products

Valve-type

Fluids with low to medium viscosity can be applied.

Characteristics

  • The pen is used by filling the body directly with fluid.

  • Fluids with low to medium viscosity can be applied.

  • After filling the body, use the pen by pushing the tip to deliver the fluid.

  • Since the parts can be disassembled even after filling, the pen is reusable depending on the filled fluid. (*)

  • The tip is easily replaceable. We can also offer guidance for replacement tips.

  • Filling and assembly treatment is available upon consultation.

*The plastic will deteriorate with long-term use.

Please adequately verify the contained fluid, performance, safety, etc. with regard to the intended use.

Product specification

Fine tip

Large tip

15mm tip

30mm tip

50mm tip

Ink reservoir-type

Characteristics

  • The pen is used by soaking the built-in ink reservoir with fluid.

  • Low-viscosity fluids can be applied.

  • Writing is possible as soon as the cap is removed.

  • Since the pen is an inserted type, once it is put together it cannot be disassembled (not reusable).

  • Filling and assembly treatment is available upon consultation.

Product specification

Tip shapes

Tips come in different shapes. We can recommend a suitable shape that meets your needs. 

Brush-type

These are pen-shaped containers that feature a brush tip at the end. This shape allows for the application of low- to medium-viscosity fluids.

Characteristics

  • The pen is used by filling the body directly with fluid.

  • Fluids with low to medium viscosity can be applied.

  • Push the side of the pen body to deliver fluid to the brush tip, and then apply the fluid.

  • Since the parts can be disassembled, the pen is reusable depending on the filled fluid.

  • Filling and assembly treatment is available upon consultation.

*The plastic will deteriorate with long-term use.

Please adequately verify the contained fluid, performance, safety, etc. with regard to the intended use.

Product specification

FAQ

I want to fill these containers with solvent. Is this possible?

A

Depending on the solvent, these containers may be used.

However, since our pen-shaped containers use general-purpose plastic (polypropylene, polyethylene and so on), some solvents may cause them to swell, or the airtightness may be insufficient.

Is it possible to purchase replacement tips for valve-type pen-shaped containers?

A

Yes, we sell replacement tips.

Can you make a tip with an original shape?

A

Yes, we can. We will design a shape that reflects the customer’s intentions.

 
 
 
 

What's New

Products

Corporate

facebook logo
instagram logo
twitter logo
pintarest logo
youtube logo

© 2020 Kuretake ZIG Corporation All Rights Reserved.